Get in contact with us

Telephone

Switzerland

Tel.: +41 44 743 33 33

Contact form

Send us a message, we will respond as quickas possisble

> Post a request

Sintratec S2

Sintratec S2, the affordable all-in-one solution, allows you to minimize downtimes and benefit from cost-effective operation. You can carry out a material change within a short space of time; tedious cleaning processes are a thing of the past.

Modulary Designed and Self-Contained

The selective laser sintering system consists of the Laser Sintering Station (LSS), the Material Core Unit (MCU) and the Material Handling Station (MHS). With the additional modules – the Sintratec Blasting Station (a blasting cabinet), the Sintratec Polishing Station (a magnetic tumbler) and the Sintratec Vortex Unit (a powder management module) – you get a uniquely self-contained process system for additive manufacturing. Once high-quality SLS printing is complete, the printed objects are conveniently and cleanly depowdered. Both the blasting unit and the magnetic tumbler help to create a refined surface.The ingenious Material Core Unit allows you to easily switch from one print material to another. Thanks to the modular system design, you can expand your SLS machinery as needed.

> Request an offer
LSS

Sintratec S2 Laser Sintering Station (LSS)

The Sintratec Laser Sintering Station’s cylindrical printing volume means you get consistent and homogeneous printing results. You can follow your print job live at any time and evaluate the surface of
the individual printed layers in real time with the integrated 4K camera. The precise laser scanning system enables improved repeat accuracy and fast printing processes. The sophisticated heating
system gives your SLS parts a high-quality surface finish.

  • Faster printing due to a shorter preparation time
  • Precise laser scanning system
  • Eight controlled heating zones for optimum printing processes

Technical Specifications

  • X-Y laser scanning system for fast printing
  • High-resolution camera for real-time evaluation
  • Touchscreen for direct operation
  • Network connection for remote control and monitoring
  • Contactless point measurement for powder surface temperature control
  • Multi-zone heating

 

Height × width × depth 1,500 × 1,000 × 750 mm
Weight Less than 100 kg
Power supply 230 V | 2 kW max

Sintratec S2 Material Handling Station (MHS)

You no longer need additional equipment for screening used print materials for reprocessing – and it’s all thanks to the efficient screening function in the Sintratec Material Handling Station. The freely accessible work area with an air filtration system gives you a clear view of the object to be depowdered, which also allows for a clean working environment.

 

  • No additional tools needed to screen the print material
  • High visibility when depowdering the parts
  • Touchscreen-based operation
Sintratec MHS

Technical Specifications

  • Air filtration system
  • High-resolution camera for real-time evaluation
  • Touchscreen for direct operation
  • Network connection for remote control and monitoring
  • Integrated screening function
  • Integrated mixing function
  • Integration with Sintratec Vortex Unit

 

Height × width × depth 1,650 ×1,000 × 750 mm
Weight Less than 100 kg
Power supply 230V |1.5 kW max

Sintratec MCU

Sintratec S2 Material Core Unit (MCU)

The mobile Sintratec Material Core Units with an integrated powder mixing function ensure convenient powder handling. Several units allow you to increase the material variety and reduce downtimes.

 

  • High level of process reliability
  • Optimum mixing ratio
  • Automatic powder detection
  • Integrated multi-zone heating for build cylinders
  • Two internal powder tanks for quick layer changeover
  • Integrated re-coating system (coordinated to powder)

 

Build cylinder height 400 mm
Build cylinder diameter 160 mm*
Height × width × depth 1,100 x 870 x 550 mm
Weight Less than 100 kg

*Effective printing range depends on the application and material

Sintratec Blasting Station

The Sintratec blasting unit creates visually appealing SLS workpieces with an improved surface quality in a short amount of time.

  • Dust-free work thanks to full circumferential seals on the cover frame and door frame
  • 12 V fluorescent tubes with 230 V power supply unit and external switch for excellent visibility
  • Suitable for different blasting materials such as quartz, glass beads and plastic beads

Working pressure 2.8–8 bar
Compressed air connection 3/8”
Internal dimensions 580 x 480 x 300 mm
External dimensions 590 x 485 x 490 mm
Weight 17.25 kg
neues Bild Blasting Station
Polishing Station

Sintratec Polishing Station

Creating smooth surfaces on your SLS workpieces is simple and convenient with the Sintratec magnetic tumbler. The stainless steel magnetic polishing pins seal surface impurities, creating an improved finish within a short period of time.

  • Autonomous and compact system
  • Sealing of surface impurities
  • Several components can be processed at the same time

External dimensions 290 x 290 x 340 mm
Weight 20 kg
Speed 2,800 revolutions per minute (rpm)

Sintratec Vortex Unit

Removing excess and used powder is a piece of cake with the professional powder management module. Powder that has already been used is collected, sieved and made available for the next print jobs.

  • Single-motor wet and dry vacuum cleaner
  • High-efficiency cyclone pre-separator
  • Anti-static industrial vacuum cleaner

Weight Approx. 20 kg

 

Included in the Sintratec S2 Material Handling Station (MHS)

Vortex Sintratec
For the purpose of providing services, this website uses cookies. You will consent to this by clicking on “OK” and/or using our services.
Please click on privacy policy to find the information on cookies and the possibilities for modifying the terms of their storage.